Scag Power Equipment FREEDOM Z SFZ36-20BS Operations Instructions download pdf (Page 17)

Section 4

6. Hourmeter (Figure 4-1). Indicates the number of

hours the engine has been operated. It operates

whenever the engine is running. Has preset

maintenance reminders for engine and hydraulic

system oil changes. Will start flashing scheduled

maintenance 2 hours before preset time and continue

flashing until 2 hours after. Automatically resets.

7. Fuse Holders (Figure 4-1). Two 20-amp fuses

protect the mower’s electrical system. To replace

fuses, pull fuse out of the socket and install a new

fuse.

8. Left Steering Control (Figure 4-1). Used to control

the mower's left wheel when traveling forward or

reverse.

9. Right Steering Control (Figure 4-1). Used to

control the mower's right wheel when traveling

forward or reverse.

10. Parking Brake Control (Figure 4-1). Used to

engage and disengage the parking brakes. Pull the

lever back to engage the parking brakes. Push the

lever forward to disengage the parking brakes.

11. Dump Valve Control Levers (Figure 4-2). Located

on the left and right side of the rear bumper, used to

“free-wheel” the mower. Rotating the levers forward

into the notch (towards the front of the mower)

allows the unit to move under hydraulic power.

Rotating the levers backward to the notch (towards

the rear of the mower) allows the mower to be moved

by hand (free-wheeling).

12. Deck Lift Foot Lever (Figure 4-1). Used to raise

and lower the cutter deck.

13. Cutting Height Adjustment (Figure 4-1). Used to

set the cutter deck at the desired cutting height.

14. Cutter Deck Release Lever (Figure 4-1). Used to

lock the cutter deck in the transport position. Push

the foot pedal forward and pull back on the release

lever to release the cutter deck for normal mowing.

Figure 4-2 Dump Valve Control

15. Seat Belt (Figure 4-1). Used to secure the operator.

Seat belt must be worn at all times during operation.

16. Seat Hold Down Release Latch (Figure 4-1).

Located behind the seat. Used to secure the seat in

the operator's position. Release the latch to gain

access under the seat.

4.2 SAFETY INTERLOCK SYSTEM

The mower is equipped with a safety interlock system

that prevents the engine from starting unless the deck

drive is disengaged, the steering control levers are in the

neutral position and the operator is in the seat. The

interlock system shuts off the engine if the operator leaves

the seat with the steering control levers not in the neutral

position and/or the cutter blades engaged and/or the

parking brake not engaged.

Never operate the mower with the interlock

system disconnected or malfunctioning. Do not

disengage or bypass any switch; injury to

yourself and/or others or property damage could

result.

WARNING:

DUMP VALVE

CONTROL LEVER

"FREEWHEEL" POSITION

"DRIVE" POSITION

2007 SFZ DVL

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 108 109

Comments to this Manuals

No comments

Scag Power Equipment FREEDOM Z SFZ36-20BS Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Lawnmowers Scag Power Equipment FREEDOM Z SFZ36-20BS